Intelligent Car Washing Machine pump common problems
The direct consequence of the damage to the pump of most automatic Car Washing Machines is the leakage of condensing agent, which is mainly caused by the aging of the pump seal ring. In addition, the belt of the engine combination is too tight, which can lead to premature wear of the pump. Antifreeze is not replaced for a long time, internal corrosion will cause damage to the pump, the product has reached the service life, a long time not to replace the Car Washing Machine also has an impact.
The following introduces several common phenomena that the pump of the
Automatic Car Washing Machine is broken.
1. The idle speed is abnormal
Because the car washing machine pump is connected with the belt, drawing cold water from the water tank, if the rotary resistance of the pump is affected, it will directly affect the engine speed, the speed will be unstable, which is mainly manifested in the unstable running speed after the car washing machine starts, if the resistance is large, it may be turned off, which mostly happens in winter.
2. The water pump is leaking
The common fault of most gas station car washing machines in the pump is leakage. The main reason for the leakage is that the seal is not in place, which allows the condensate to penetrate the bearing of the pump, thus flushing the lubricant on the bearing, resulting in bearing damage. Such leaks are internal leaks. External leakage is also the main cause of pump damage, including long-term use of engine seals and gaskets caused by aging, heater internal leakage and so on.
3. Noise
The pump of the car washing machine at the gas station has an obvious noise phenomenon, which means that the inside of the pump is beginning to be damaged. The main reason for the noise phenomenon is that the bearing begins to damage, or the impeller begins to loosen when rotating, and gradually separates from the rotating shaft, resulting in noise phenomenon.Tunnel Car Washing Machine