Tunnel type computer car washing machine fault treatment

Tunnel type computer Car Washing Machine common fault treatment

1, if the high pressure water pressure of the tunnel Automatic Car Washing Machine pump is too low, the water pressure of the gate valve can be adjusted, the transmission belt is not tight, and the valve needs to be replaced.
2, the pump found abnormal sound, may be inhaled gas, to immediately check the quality of the tunnel computer washing machine tank is not water, remove the filter element, to avoid blocking.
3. The distribution system of car wash liquid is abnormal, which can adjust the proportion of car wash liquid of high-quality tunnel computer Car Wash Machine.
4, the tunnel automatic car washing machine foam spraying uneven, is likely to be the failure of the foam system, key inspection; The wind pressure of the car washing machine is too small or too large, and you can try to adjust the air pressure adjustment equipment.
5, if the foam pipeline appears water leakage or leakage, please check whether the pipeline is strong and loose.
6. The nozzle of the tunnel automatic car washing machine terminates the rotation, and the nozzle should be regularly checked to clear whether there is obstruction and the damaged rotator should be replaced; The Angle of the nozzle can be adjusted appropriately.
7, the walking wheel of the tunnel automatic car washing machine appears to run off, to check whether there is a jam, the bearing shaft is not intact, the chain is too tight or too loose will cause the car washing machine to shake when running.Tunnel Car Washing Machine