Philippines take you to fully understand the Automatic Car Washing Machine
Automatic Car Washing Machine is generally divided into: non-contact automatic car washing machine and brush automatic car washing machine.
The non-contact type is actually a semi-automatic machine, because the middle needs to be manually assisted cleaning, and the cleanliness of the cleaning is not very high, after all, the high pressure water is certainly not as thorough as the brush cleaning, but its machine structure is simple, and the investment is relatively small.
According to the different movement of the main body, it is divided into two categories: Reciprocating Car Washing Machine and Tunnel Car Washing Machine. The car in the process of driving friction with the air, will be attached to the car paint surface a lot of dust, a long time will form a film, this film will cause sustained damage to the car paint, high pressure water is difficult to wash off this film. The Car Wash Machine with a brush, the brush can evenly wash off the film, and now the brush is a high composite material, the damage caused by the car paint is basically negligible, because even if the artificial car wash will involve the micro-hard particles attached to the towel friction car paint. The controller used: the domestic car washing machine generally uses PLC technology, the imported car washing machine uses CPU (MCU) technology, about the two technologies are currently mixed do not make comments. PLC basically relies on current sensing technology, relying on brush to feel the shape of the car. CPU technology relies on computer photoelectric sensors, car wash will scan the car in a full range, and the safety performance is relatively higher.
Tunnel car washing machine - the installation length is required to be about 26, which is relatively more suitable for those gas stations or open Spaces, residential properties such as a large number of daily car washing places. At the same time, the economic benefits it brings are also the most significant, because the car wash speed is generally 1.5-3min/ unit time, and you can wash 2-3 cars at the same time, which greatly speeds up the efficiency of the work, and the driver does not need to wait for a long time to queue up, which can give customers a better consumption experience.
The length of the installation is generally about 10-12 meters, which is more suitable for the installation and use of relatively small places such as individual stores and small gas stations for car beauty, and the speed of car washing is 2-4min/ time, and only one car can be washed each time. This kind of machine has relatively high requirements for the frame (the general error can not be greater than 2 mm) because the machine is running when its walking route requirements are level, so the production process requirements of the manufacturer are very strict.
These two types of machines are relatively large investments and have requirements for the site. Investment in the installation of automatic car washing machine in addition to the machine itself can bring economic benefits, in the passenger flow gradually increased at the same time can sell more peripheral products, such as gas stations can sell more oil, car beauty shops can also sell more auto parts and related beauty services.
Regarding the purchase and investment, it is necessary to weigh the pros and cons according to the site and the daily amount of car washing, the above two kinds of machines are not good or bad, and the tunnel type will certainly benefit more considerable if the site is enough, and can also give customers a more advanced car washing experience. If the space is limited, choose a reciprocating machine, and the efficiency of car washing is as fast as it is. Less investment returns less income, and more investment returns more income.