Brazil in hot summer, it is important to avoid the mistake of washing the car
Washing the car in the hot sun will damage the paint. Many private car owners like to wash their cars in the hot sun, thinking that the water on the car body can be dried soon after washing. What seems to be a common practice is really the right way to wash a car? Today, KUSHUILONG Car Wash Machine will take you to understand.
In fact, the convex lens effect formed by water droplets when washing cars under the hot sun will cause local high temperature phenomenon on the top of the car paint, and the car paint will lose its luster over a long time, which is not right. If you wax at this time, it is easy to cause uneven body color.
Draw circles and wax - poor effect. Many people habitually wax the body into a circle, which is an incorrect method. Automatic Car Washing Machine has the characteristics of smooth transmission, accurate transmission ratio, reliable operation, high efficiency and long service life. The correct waxing method is to alternate straight, horizontal and vertical lines, and then follow the direction of rain flow, so as to reduce the effect of concentric rings in the paint.
Washing a car is like taking a bath - it harms the air conditioning. In summer, the temperature rises and the dust increases. Car owners get dirty easily. The frequency of car washes also began to rise. Many car owners also want to wash their cars like a bath. The strong impact force generated by Automatic Car Washing Equipment is obviously greater than the adhesion between dirt and the surface of the object, so the use of automatic Car Washing Equipment can effectively peel off and wash off all kinds of dirt, so as to achieve good results in cleaning the surface of the object. However, it should be noted that the appearance of the car air conditioning must be kept dry. If the car air conditioner is accidentally wet, it will affect the service life of the car air conditioner.
Too much oil, failure - when the amount of oil in the engine oil pan is insufficient, due to the small amount of oil, the friction between the bearing and the journal will cause poor lubrication, increase the degree of wear, and even cause the accident of burning the tile shaft. However, if the oil is too much, the crankshaft handle and the big end of the connecting rod will produce a violent agitation, which will not only increase the internal power loss of the engine, but also increase the oil splashed on the cylinder wall, resulting in the failure of burning and discharging the oil. Therefore, the oil in the engine oil pan should be controlled between the upper and lower lines of the dipstick.
The fan belt is too tight - the bearing load is heavy in summer and the temperature is too high. Some drivers believe that increasing the tightness of the fan belt can improve the cooling effect of the engine, so they constantly increase the tightness of the fan belt. The fan belt should be kept properly tight and tight, which will lead to excessive bearing load and wear, increase power consumption, and shorten the deformation life of the bending belt of the pump shaft.